High Temperature Black Body SJOS-HTBB-750-800
The HTBB-750-800 offers a 0.75” aperture with maximum temperature of 800C. The cavity is shaped in a graphite core surrounded by a rugged nichrome heater inside a reflective shell, then enclosed by high temperature insulation, providing a stable and uniform thermal target. The Black Body section is separated from the Power & Control module by 4ft. detachable cable, for easy access to controls. The modules built into compact, rugged commercial housings with steel covers. Control is accessible over standard serial communications or manually through the buttons on the controller.
Temperature Range: Up to 800°C
Aperture: 0.75” dia.
Controller : “OMEGA” #CN7833
Controller Modes: PID, ON/OFF, Manual
Command and Control: Serial over RS-485 (2 wire); 9 Pin D-Sub Plug or Manual
Power Inlet; 120VAC, 50/60 Hz, IEC 320-C14 Receptacle, 10A Fuse
Power: <300 Watts Max.
Size: Control Module – 8” (203mm) Cube;
Black Body Module - 8”W x 10.5”L x 8”H (203mm W x 267mm L x 203mm H)
Weight: Control Module - 15lbs;
Black Body Module - 13lbs.
Operating Temperature: 0 to 50°C (32 to 122°F)
Storage Temperature: 20° C to + 65° C (-4°F to 150°F)
Relative Humidity: 35% to 80% (non-condensing)